个人简述:

振动理论及应用”获国防科工委“国防科技工业图书奖”2005.12 中航工业集团科学技术二等奖，2014.12

科研工作:

2003-2006，香港 理工大学 纳米中心 研究员西工大力学学院讲师（1987）、副教授（1991）、航空学院教授（2006-至今） 近几年，主持国家自然科学基金项，航空基金项，主持和参加国防基础预研，工程应用项目和其它大型项目多项。例如，飞机结构的耐撞性设计研究；C919飞机及内部设施适坠性适航要求及验证技术研究；飞行器动强度分析、设计与控制技术研究；飞机结构的抗鸟撞设计与分析；编织复合材料结构抗冲击性能分析与损伤预报；民机机身结构和内部设施适坠性分析、设计与验证；柔性导电织物的大应变传感特性及其机理研究；泡沫材料缓冲吸能特性及优化设计研究；泡沫材料动态吸能研究；复合材料连接接头的剪切和疲劳性能研究；飞机典型金属结构振动疲劳研究；等等。 近年来的代表作代表作书及章节1. 余同希，薛璞, 工程塑性力学, 高教出版社, 2010.22.. P. Xue，X.M. Tao, M YLeung, H Zhang, Electro-mechanical properties of conductive fibers, yarns andfabrics, Chapter 5 in thebook Wearable Electronics and Photonics edited by Xiao-ming Tao, WoodheadPublishing Co. UK, 2005. 3. P. Xue, X.M. Tao andT.X. Yu, Cellular Textile Composite: Configuration and Energy absorptionMechanisms. Chapter 3  in Engineering Plasticity and Impact Dynamics, ed. L.C. Zhang, World Scientific, 2001.4.方同，薛璞. 振动理论及应用，西北工业大学出版社.文章1. H.S.U.BUTT, P. XUE,Jiang, T.ZWang, B., Parametric Identification for Material ofViscoelastic SHPB from Wave Propagation Data Incorporating Geometrical Effects,International Journal of Mechanical Sciences, September 30 (91), 46 – 54,20152. T.Z.Jiang, P. Xue,, H.S.U. Butt, Pulse shaper design for dynamic testing ofviscoelastic materials using polymeric SHPB, International Journal of ImpactEngineering，79,45-52,20153. GCLi , P. XUE et al, Shear behavior and failure analysis of a compositeT-joint with a cutout, Journal of Composite Materials, 49(19) 2015，2307-2315,20144. HafizSana Ullah BUTT, Pu XUE, Bing HOU，Evaluation of phenomenological of Model Parameters usingDensity Dependent Laws for Prediction of Mechanical Response of CellularMaterials，Bulletinof the Polish Academy of Sciences Technical Sciences，63（1） 2015 5. L.Li, P. Xue, Y. Chen, H.S.U.Butt，Insightinto cell size effects on quasi-static and dynamic compressive properties of 3Dfoams，MaterialsScience and Engineering A， 636，2015，60-696. Butt, Hafiz Sana UllahXue, Pu, Determinationof the Wave Propagation Coefficient of Viscoelastic SHPB: Significance forCharacterization of Cellular Materials, International Journal of ImpactEngineering, v 74, p 83-91, 2014 7. NaveedIqbal, P. Xue, B. Wang, Y.L. Li，Onthe High Strain Rate Behavior of 63-37 Sn-Pb Eutectic Solders with TemperatureEffects，InternationalJournal of Impact Engineering, v 74, p 126-131, 20148. P.Xue, M. L. Ding and T. X. Yu,  DeformationMechanism of a Typical Fuselage Section under a Vertical Crash,Latin American Journal of Solid and Structure, V11（9），P1615-1627,20149. J.P.Wang, P. Xue, XM Tao, Strain Sensing Behavior and Its Mechanism ofElectrically Conductive PPy-Coated Fabric, High Performance Polymers, 26（3）pp364-370,201410.P. Xue,  J.P. Wang, XM Tao,FlexibleTextile Strain Sensors from PPy-coated XLATM Elastic Fibers, High PerformancePolymers, 26（3）pp364-370,201411.赵士洋，薛璞，An Effective NumericalApproach with Complete Damage Transfer Under a Multi-step Loading，APPLIEDMATHEMATICS AND MECHANICS-ENGLISH EDITION, p309-402, Vol 35, No. 3 ，201412 赵士洋，薛璞，损伤变量对复合材料损伤演化过程的影响分析, 西北工业大学学报 32（4），542-545，201413.Wei GUO， Pu XUE，Jun YANG ，Nonlinear Progressive Damage Model for Composite LaminatesUsed for Low Velocity Impact，Applied Mathematics and Mechanics V34 No.9, p1145-1154, 201314. Naveed Iqba , Xue P. LiaoH.J, Wang B. Li Y.L., Experimental Study on Strain Rate Sensitivity of DuctilePorous Irons，Journalof Impact Engineering，48,82-86,201215. Wang J.P. Xue P. Tao X.M.，Strain sensingbehavior of electrically conductive fibers under large deformation，Materials Science and Engineering A, v528, n 6, p 2863-2869,  201116.  P. Xue, N. Zhao, J Liu, YL Li, AnApproach to Assess Bird-strike Resistance for a Wing Slat Structure，Journal ofAircraft 48(3), 1095-109817.P. Xue, C.F. Qiao，T.X.Yu , Crashworthiness Study of a Keel Beam Structure, International Journal ofMechanical Science, 52,2010,  672-679. 18.Naveed Iqba , Xue P. Liao H.J, Wang B. Li Y.L., Material characterizationof Porous Bronze, Materials Science and Engineering A, v 528, n 13-14, p4408-4412, 201119 薛璞 ,王俊璞,X.M. Tao, 三种不同导电纤维的大应变传感特性的比较研究, 功能材料, v 42, n 3, p557-559, 201120.赵楠，薛璞，李玉龙, 鸟体撞击蜂窝夹层板的动力响应分析研究, 兵工学报, 2010, 31，, p 184-18921 P.Xue, Keun Hoo PARK, X.M. Tao, W. Chen and X.Y. Chen, ElectricallyConductive yarns Based on PVA/carbon Nanotubes, Composite Structure, 78, 2,2007,  271-277.22.P. Xue, X.M. Tao , H.Y. Tsang, In-situ SEM Studies on Strain SensingMechanisms in PPy-coated Electrically Conducting Fabrics, Applied SurfaceScience, 2006 . 253. 7,302007, 3387-3392.23.P. Xue and X.M. Tao, Morphological and Electromechanical Studies ofFibers Coated with Electrically Conductive Polymer, Journal of Applied PolymerScience, 98(4), 1844–1854, 2005.24 P.Xue, Keun Hoo PARK, X.M. Tao, W. Chen and X.Y. Chen, ElectricallyConductive yarns Based on PVA/carbon Nanotubes, Composite Structure, 78, 2,2007,  271-277.25.P. Xue, J. Cao and J. Chen, Integrated Micro/Macro Mechanical Model ofWoven Fabric Composites under Large Deformation, Composite Structure, 70(1),69-80, 2005. 26.P. Xue, X.M. Tao, T.X. Yu, Keith W.Y. Kwok and M.Y. Leung,Electromechanical Behaviour of Fibres Coated with Electrically ConductivePolymer, Textile Research Journal, 74(10), 929-936, 2004. 27.P. Xue, X.Q. Peng and J. Cao, A non-orthogonal constitutive model andits numerical implementation procedure for characterizing woven composites,Composites Part A – Applied Science and Manufacturing,34(2): 183 – 193, 2003. 28S.W. Lam, P. Xue, X.M. Tao and T.X. Yu, Multi-scale study of tensileproperties and large deformation mechanisms of polyethylene terephthalatefibre/polypropylene matrix knitted composites, Composite Science andTechnology, 63:1337-1348, 2003. 29.Jian Cao, Pu Xue, XQ Peng and Neil Krishnan, An approach in modeling thetemperature effect in thermo-stamping of Woven Composites, Composite Structure,61(4):413-420, 2003. 30.P. Xue, T.X. Yu and X.M. Tao, Tensile properties and meso-scalemechanism of weft-knitted textile composites for energy absorption, CompositesPart A – Applied Science and Manufacturing, 33: 113-123, 2002.31.P. Xue, T.X. Yu and X.M. Tao, Flat-topped conical shell under axialcompression, International Journal of Mechanical Science, 43(9): 2125-2145,2001. 32.P. Xue, T.X. Yu and Edmund Chu, An energy approach for predictingspringback of metal sheets after double- curvature forming, Part I:axisymmetric stamping, International Journal of Mechanical Science, 43(8):1893-1914, 2001. 32.P. Xue, T.X Yu and Edmund Chu, An energy approach for predictingspringback of metal sheets after double- curvature forming, Part II: Unequaldouble curvature forming, International Journal of Mechanical Science, 43(8):1915-1924, 2001. 33T.X.Yu, X.M. Tao and P. Xue, Energy-absorbing capacity of grid-domed textilecomposites, Composite Science and Technology, 60(5): 785-800, 2000. 34 P.Xue, X.M. Tao and T.X. Yu, Research progress in the energy-absorbingcapacity of textile composites, Advances in Mechanics, 30(2): 227-238, 2000.35.P. Xue, T.X. Yu and X.M. Tao, Effect of cell geometry on theenergy-absorbing capacity of grid-domed textile composites, Composites Part A –Applied Science and Manufacturing, 31:861-868, 2000. 36.J.S. Wu, P. Xue and W-Y Mai, Effect of blending sequence on themorphology and impact toughness of poly (ethylene terephthalate)/polycarbonateblends, Polymer Engineering and Science, 40(3): 786-797, 2000.

教育背景:

1978-1981，西工大力学专业学士学位1982-1985，西工大力学专业硕士学位1997-2000   香港科技大学机械工程专业博士学位2000-2003，美国西北大学机械工程专业博士后